For Better Performance Please Use Chrome or Firefox Web Browser

Publications

Conference Papers
Title Publication Date
Esfahanian, M. and Salehi, M. “Concept Design and Simulation of a New Power Train Structure for Flywheel Hybrid”, Presented in the 7th Int. Conf. on Internal Combustion Engines, Tehran, Nov. 2011 November, 2011
Zargarian, A., Saadat, M. and Esfahanian, M. “Fazzy Control of Electrical Hybrid Vehicle with Learning Mechanism”, Presented in the National Conf. on Energy, Vehicle Technology and Stable Development, Tehran, Iran, Oct. 2011 October, 2011
Pourbafarani, Z., Nehzati, H., Esfahanian, M., Sangtarash, F., and Sagha, H. “The design and implementation of the regenerative braking system for the first hybrid electric city bus in the Middle East employing AVL CRUISE”, International User Conferen September, 2011
Manuchehri Sharif, A., Akhavan. S. and Esfahanian, M. “Analysis and Simulation of Airplane Landing Gear and Force Estimate for Hydrulic Actuator” Presented in the 10th Conf. of Aerospace Soc.of Iran, Tehran, Iran, March 2011 March, 2011
Masih Tehrani, M., Ha'iri Yazdi, M.R., Bazargan, D. and Esfahanian, M. “Performance Analysis of Hybrid Energy Storage in Different Driving Cycles”, Presented in the 2nd Power Eelectronics, Drive Systems and Technology Conf., Tehran Iran, Feb. 2011 February, 2011
Najafi, H., Esfahanian, M. and Asgari, J. “Optimal Automated Manual Transmission by Fuzzy Logic”, 17th Iranian Conf. on Electrical Engineering, Tehran, Iran, 2009 December, 2009
Masih Tehrani, M., Esfahanian, M., Mahmoodian, A., Manteghi, A., Nehzati, H., and Amiri, M. “Development of a Feed-Forward Model for Dynamic Simulation of Hybrid Vehicles”, 17th Iranian Conf. on Mechanical Engineering, Tehran, Iran, 2009 December, 2009
Esfahanian, M., Nehzati, H., Sangtarash, F., Haddadi, S., and Amiri,M., "An Investigation on the Effect of Substituting the Gearbox Retarder with Regenerative Braking System on Breaking performance and Fuel Economy Through the Hybridization of a Conv September, 2008
Esfahaninan, M., Porsa, S., Gorji, M., Rahemi, H. and Jafari, S. “Architectural Design, Positioning and Analysis of Hybrid Vehicle Equipment” Presented in the SAE Int. Power Train, Fuels and Lubrications Congress, Shanghi, China, 23-25 June 2008 June, 2008
Akhgari, A., Sangtarash, F., Esfahanian, M., Amiri, M “Modeling and Optimizing Handling Parameters of a Series Hybrid Electric City Bus Using ADAMS/Car” Presented in the SAE Int. Power Train, Fuels and Lubrications Congress, Shanghi, China, 23-25 Ju June, 2008
Navidfar, M., Ziaei-Rad, S. and Esfahaninan, M. “Simulation and Calculation of Structure Borne Noise Level Inside the Car Using FEM” Presented in the 16th Annual ISME Conference and Pub. in the Preceding of the Conf., Kerman, May 2008 May, 2008
Rasekh Saleh, N., Esfahaninan, M., Dehbashi, and Alimrdany, “A Semi-Empirical Calculation of Friction Coefficient in Cold Rolling Based on Chemical Parameters” Presented in the 16th Annual ISME Conference and Pub. in the Preceding of the Conf., Kerman May, 2008
Kargarnovin, M., Rasekh Saleh, N., Esfahaninan, M. and PirAli. H. “A Semi-Empirical Method to Determine the Roll Gap to Attain the Best Strip Exit Thickness in Cold Rolling of Steels” Presented in the 16th Annual ISME Conference and Pub. in the Prece May, 2008
Esfahaninan, M., Jafari, A., Porsa, S. and Rahemi, H. “Architectural Design and Analysis of Hybrid Electric Bus Equipments” Presented in the 1st Annual Int. Conference on Electronics in Vehicle Industry and Pub. in its Proceedings, Tehran, Feb. 2008 February, 2008
Khodabakhshian, M., Davari, M., Ziaee Rad, S. and Esfahanian, M. “The effect of Suspension Parameters on Stability of Formula Vehicle” Presented in the 15th Annual ISME Conference and Pub. in its Proceedings, Tehran, May 2007 May, 2007
Esfahanian, M., Rasekh Saleh, N. and PirAli, H. “Analytical and Experimental Determination of Friction Coefficient Based on Mechanical Parameters of Cold Rolling” Presented in the 15th Annual ISME Conference and Pub. in its Proceedings, Tehran, May, 2007
Esfahanian, M., Esfahanian, V., Sangtrash, F., Amiri, M. and Khanipour, A. "Evaluation of Series Hybrid Heavy-Duty Transit Bus Performance," FISITA World Auto. Cong., Yokohama, Japan, Oct. 2006 October, 2006
Khanipour, A., Esfahanian, M., Sangtrash F. and Amiri, M. "Effects of Drive Train Hybridization in a Series Hybrid Electric Transit Bus," Presented in the 8th Biennial Conf. on Eng. Systems Design and Published in the Proc. of ESDA06, Torino, Italy, July July, 2006
Esfahanian, M., Khanipour, A., Nabi A., Fazeli, A. and Amiri, M. "A Sequential Approach for Hybridizing Conventional Vehicles and an Approval Example," Presented in the 8th Biennial Conf. on Eng. Systems Design and Published in the Proc. of ESDA06, Torin July, 2006
Salehi, I., Forouzan, M.R., Esfahanian, M., Salimi, M., and Adibi-Sedeh, A.H. “Elasto-Viscoplastic FE Analysis of Slab width Reduction by Sizing Press Mill,” To be Presented in the Asia Steel International Conf. 06 and Pub. in its Proceedings, Fukuoka, J May, 2006
Salehi, I., Forouzan, M.R., Salimi, M. and Esfahanian, M. “Elasto-Viscoplastic Analysis of Slab with Reduction by Sizing Press Mill by Explicit FE,” Presented in the 14th Annual ISME Conf. and Pub. in its Proceedings, Isfahan, May 2006 May, 2006
Esfahanian, M., Khanipour, A., Amiri, M., Zaveh, F. and Ghomashi H. "Simulation and Comparison of Hybridization of Energy Source of Iran-Khodro O457 Bus," 4th International Conf. on Internal Combustion Engines, pp. 165-175, Dec. 2005 December, 2005
Forouzan, M.R., Ghasemi, A., Veradi, N. and Esfahanian, M. "Design of Reinforcing Plates for Controlling of Crack Propagation in Rail-Way Bogies," 13th Annual ISME Conference, Isfahan, May 2005 May, 2005
Salimi, M., Esfahanian, M. and Rasekh Saleh, N. “Calculation of the Separation Force of the Rollers in Cold Rolling," 13th Annual ISME Conference, Isfahan, May 2005 May, 2005
Salami, M., Esfahanian, M. and Ranjbar, M. "Development of On-Line Model for Finishing Control in Hot Strip Mill,"12th Annual ISME Conference, Vol.6, Tehran, May 2004 May, 2004
Forouzan, M.R., Ghasemi, A., Golzad, P., Veradi, N. and Esfahanian, M. "Application of FEM in Design and Analysis of Freight Train Bogies," 7th Railway Transit Conference, Paper no. 295, pp. 97, 2004 May, 2004
Sedaghatnasab, M. and Esfahanian, M. "Fault Detection of Rotary Machines Using Intelligent Algorithms," 10th Annual ISME Conference, Vol. 2, pp. 1009-1018, Tehran, May 2002 May, 2002
Esfahanian, M., Rahideh A., and Shahnazari, M. "Analysis of Power Train Systems for Hybrid Electric Vehicles; Part 1: Series Hybrid Systems," 1st Conference of Hybrid Electric Vehicles, Tehran, 2001 January, 2001
Esfahanian, M., Moosavi, H., and Zolfaghari, J. "Optimization of Dynamic Response of a Cantilever Beam Using Genetic Algorithm," 9th Annual ISME Conference, Vol. 1, Pp.627-639, Rasht, 2001 January, 2001
Esfahanian, M., Rahideh A., and Shahnazari, M. "Analysis of Power Train Systems for Hybrid Electric Vehicles; Part2: Parallel Hybrid Systems," 1st Conference on Hybrid Electric Vehicles, Tehran, 2001 January, 2001
Tavakoli, K. and Esfahanian, M. "Sensor Arrangement and Feedback System Design for ROVs," 9th Annual ISME Conference, Vol.2, Pp. 533-540, Rasht, 2001 January, 2001
Esfahanian, M "Elastohydrodynamic Lubrication of Piston Rings," 7th Annual ISME Conference, Vol. 2, Pp. 561-570, Zahedan, 1999 January, 1999
Esfahanian, M, Nasr Esfahani, M., and Moosavi, H. "Analysis Of 3-D Residual and Thermal Stresses in Rail Way Wheels Due to Breaking Action," 7th Annual ISME Conference, Vol. 2, Pp. 561-570, Zahedan, 1999 January, 1999
Hamrock, B.J., Esfahanian, M., and Brodkey, R,S. " Rheological Effects in Elastohydrodynamic Lubrication," Presented at ACS Symposium On Chemistry And Chemical Engineering In Tribology, Dallas, Texas, April 1989, and Published in the Proceedings of The Sy  
Journal Papers
Title Publication Date
Esfahanian, M., Shahin, B., and Ziaee Rad, S. “Investigation of Modeling of Disc Brake Squeal and its Influencing Parameters” Journal of Computation Methods in Engineering, Vol. 30, No. 1, pp. 45-59, 2011 January, 2011
Amiri, M., Esfahanian, M., Manteghi, A., Esfahanian, V., Nehzati, H. and Hairi-Yazdi, M.R. "Implementation of a Fuzzy Logic Control Strategy for a Hybrid Electric City Bus Tuned Based on Static Optimization", Submitted for Review to Jour. Of Power Sou January, 2011
Shahin, B., Ziaee Rad, S. and Esfahanian, M. “Reduction of Brake Squeal Using Piezoelectric Actuators” Int. J. Vehicle Noise and Vibration, Vol. 7, No. 3, pp. 195-211, 2011 January, 2011
Manteghi; A., Esfahanian; M., Amiri; M., Esfahanian; V., and Nehzati, H., "Implementation of a Fuzzy Logic Controller for a Hybrid Electric City Bus using Static Optimization" Submitted for Review to International Journal of Systems Science, 2011 January, 2011
Najafi, H., Esfahanian, M. and Askari, J. "Advanced Gear Shifting with Automated Manual Transmission by Fuzzy Logic" Submitted for Review to International Journal of Automative Technology, 2011 January, 2011
Alaee, A., Salimi, M. and Esfahanian, M. “Investigation of Work Roll Thermal Crown in Rolling Process and its Effect on Strip Shape” Submitted for Review to Steal Research Int. 2011 January, 2011
Feyzi, T., Esfahanian, M., Tikani, R., and Ziaee Rad, S. “Simulation of the Dynamic Behaviour of the Magneto-rhological Engine Mount for Automotive Applications” Int. Journal of Automotive Engineering, Vol. 1, No. 2, pp. 97-104, 2011 January, 2011
Shahin, B.,Esfahanian, M.,Ziaei Rad, s." An Investigation On Brake Squeal Phenomenon and the Effect of Different Parameters on its Dynamic Characteristics" Jour. Of  Numerical Methods in Engineering, Year 30, No. 1, Pp.45-59, Februari 2011 February, 2011
Tikani, R., Ziaee Rad, S. and Esfahanian, M. “A New Hydraulic Engine Mount Design without the Peak Frequency” Journal of Vibration and Control, Vol. 17, No. 11, pp. 1644-1665, 2011 November, 2010
Najafi, H., Esfahanian, M. and Askari, J. "Optimal Automated Manual Transmission by Genetic Quantum Algorithm" Submitted for Review to Journal of Applied Soft Computing, 2011 January, 2011
Esfahanian, M.,Kabiri, E.,Ziaei Rad, S. "Rollover Simulation And Required Structural Modification of O457 Bus" Jour. Of  Numerical Methods in Engineering, Year 29, No. 2, Pp.47-65, March 2010 March, 2010
Amiri, M., Esfahanian, M., Hairi-Yazdi, M.R., Esfahanian, V. "Minimization of Power Losses in Hybrid Electric Vehicle in View of Prolonging of Battery Life", Jour. Of Power Sources, Vol. 190, No. 2, pp. 372-379, February 2009 February, 2009
Amiri, M., Esfahanian, V., Hairi-Yazdi, M.R., Esfahanian, M., Fazeli, A.M. and Nabi, A. "Feed-forward Modeling and Fuzzy Logic Based Control Strategy for Powertrain Efficiency Improvement in a Parallel Hybrid Electric Vehicle" Jour. of Mathematical a Septmber, 2008
Salimi, M.,Arabof, M.,Esfahanian, M. "A Mixed Film Lubrication Model In Rolling Of Foil,"Steel researrch int, Metal Forminfg 2008. Vol. 2,Pp. 129-136 May, 2008
Arabof, M., Salimi, M. and Esfahanian, M. "Cold Rolling of Foil Metals under the Mixed Lubrication Regime" Presented in Metal Forming 2008, Germany and Published in the Steal Research Int. Vol. 79, 2008
May, 2008
Nahvi, H. and Esfahanian, M. "Fault Identification in Rotating Machinery Using Artificial Neural Networks," Jour. of Vibration and Control, Vol. 219(2), pp. 141-158, 2005 November, 2004
Moosavi, H. and Esfahanian, M. "On Minimizing Mechanical Stresses of the Rail-Way Wheels," Intr., J. Of Engineering, Vol.13, No. 1, Pp.61-76, 2000 February, 2000
Esfahanian, M., Hamrock, B.J., and Elsharkawy, A.A. "On the Hydrodynamic Lubrication Analysis of Piston Rings," J. of Lubrication Science, Vol. 10, No. 4, Pp. 265-286, 1998 Agust, 1998
Esfahanian, M. and Hamrock, B.J. "Fluid – Film Lubrication Regimes Revisited," STLE Tribology Trans., Vol. 34, No. 4, Pp. 628- 632, 1991 May, 1992
Books
Title Publication Date
Esfahanian, M. et. al. Hybrid Electric Vehicles, Its necessity and Design, VFERI, 2005 May, 2005
Hamrock, B.J. Machine Element Design, McGraw-Hill, 2000 May, 2000
Hamrock, B.J. Fundamentals of Fluid Film Lubrications, John-Whiley, 1992 May, 1992

 

تحت نظارت وف ایرانی